BCS Overhead Door | College Station 979-218-9213

Garage Door Repair Tips

If your garage door is not working properly, you might need to call a garage door repair service. The issue can occur for lots of reasons. In many cases, the door opener button is malfunctioning. You can additionally locate this button near the door opener. One more feasible service is to unplug the motor from its electric circuit. Typically, this electric motor is connected to a ceiling light, so unplugging it as well as connecting it back in must fix the issue.

Issues with garage door openers

If you notice that your garage door opens up and closes slowly or does stagnate at all, you might be experiencing trouble with your garage door opener. It might result from a faulty reasoning board or wall control, or a bad electrical motor. It may additionally be because of the fact that the door sensing units are interfered with by dirt or moisture. In this instance, you might require to re-program your garage door opener.

One more issue with garage door openers is that the springs may be damaged. If this holds true, your garage door opener will be incapable to raise the door more than a foot off the ground. As a result, if you believe that the springs are damaged, call a garage door opener repair service immediately. The spring system runs with a great deal of stress and also energy, and also it can be unsafe to attempt to get rid of or change it on your own.

Usual issues with garage door springs

If you’ve ever before observed that your garage door isn’t moving as smoothly as it should, the issue might be the springs. This is the most usual root cause of garage door breakdowns. Without an effectively tensioned spring, the door will certainly not remain open and can also shut as well swiftly. This is dangerous, particularly if you have children or pets around the residence.

To identify the issue, you’ll first requirement to look around the garage door to see if there is any apparent trouble. While it’s feasible to tell if a spring is damaged simply by looking, this isn’t always the instance. For example, a damaged spring might not have been broken cleanly, and also it might be extending as opposed to breaking.

Maintenance checks before recycling the garage

If your garage door has actually been inactive for some time, you should carry out a few upkeep checks before reusing it. Check all joints and springs to guarantee that they are in good condition. Check for indications of wear and also damages, such as excessive sound or resonance. If you see any type of damage to the hinges or mounting equipment, you should change them. You need to also inspect the seals and insulating product of the door to make sure that they are undamaged.

Ensure all bolts and also screws are tight. If any kind of hang or is rusted, it can cause the garage door to malfunction. Tightening up as well as lubricating these parts can help them work effectively. Furthermore, you require to check all joints as well as rollers for damages. Inspect the ornamental equipment too. Ornamental hardware can look wonderful on a garage door, but it can come to be used as well as harmed over time. You can inspect the ornamental equipment by inspecting the door and also tightening the fasteners.

BCS Overhead Door

University Station, TX 77840

( 979) 218-9213


Commercial Garage Door Repair

Garage Door Sales & Installation

Garage Door Repair

Garage door opener repair

Overhead Garage Door Service

BCS Overhead Door

College Station
TX 77840,

(979) 218-9213

Media Contact



Sign Up To Recieve News And Updates

To be updated with all the latest news, offers and special announcements. 



Trending Businesses

Media Contact